loader image

Midea M-THERMAL MHC-V14W/D2N8-B 14kW 1ph Heat Pump

Certifications: EN14511, EN14825, EN50564, EN12102, (EU) No 811/2013, (EU) No 813/2013, OJ 2014/C, 207/02:2014, EN12102-1 etc.
Warranty:
3 years for the compressor and 2 years for the remaining parts
Pump Type:
Monobloc Output: 14kW

Code: MHC-V14W/D2N8-B

Midea M-THERMAL MHC-V14W/D2N8-B

 

The MIDEA M-Thermal heat pump is an integrated system for space heating and cooling, as well as domestic hot water production. The system can fully replace traditional gas or oil boilers, but can also operate in conjunction with them.

DC Inverter Technology

Conventional heat pump compressors operate at full load even when only partial load is required, leading to energy waste. Midea’s M-Thermal products utilize DC inverter technology, which allows for the use of only the necessary power corresponding to the actual load. Consequently, power is consumed solely based on actual energy demand.

High Energy Efficiency

The advanced inverter system with a DC motor forms a complete DC frequency conversion system, dramatically reducing power consumption by more than 30%.

Stable Water Temperature, Enhanced Comfort

Thanks to DC inverter technology, the compressor’s rotation speed is fully controlled according to energy requirements.

Fast Start-up

The inverter system delivers power according to energy demand by adjusting the rotational motor’s frequency, thus enabling comfort conditions to be achieved faster compared to a non-inverter system. Start-up time is reduced.

Fewer Start-ups

Inverter technology ensures fewer start/stop cycles. This significantly increases compressor lifespan and reduces abrupt noise.

Quiet Operation

For most of its operating time, the energy required in a building is less than the peak load; consequently, the system operates under partial load for the majority of the time. Partial load conditions achieved through the adjustable compressor frequency produce low noise levels, resulting in quiet operation.

Flexible Operation and Greater Comfort

Weather-dependent operation with climate correlation ensures absolute comfort. There are 32 climate correlation curves available for selection. Depending on the chosen curve, the unit automatically adjusts the water outlet temperature according to the outdoor ambient temperature.

The product features:

  • Wired controller (thermostat).
  • Integrated hydronic module.
  • Electric heaters (excluding the 9kW model).
  • Greek menu.
  • Integrated WiFi Msmartlife APP control.
  • Modbus protocol and network flexibility.

 

 

View all Midea products HERE

SKU: MHC-V14W/D2N8-B Categories: , Brand:

Midea M-THERMAL MHC-V14W/D2N8-B

 

The MIDEA M-Thermal heat pump is an integrated system for space heating and cooling, as well as domestic hot water production. The system can fully replace traditional gas or oil boilers, but can also operate in conjunction with them.

DC Inverter Technology

Conventional heat pump compressors operate at full load even when only partial load is required, leading to energy waste. Midea's M-Thermal products utilize DC inverter technology, which allows for the use of only the necessary power corresponding to the actual load. Consequently, power is consumed solely based on actual energy demand.

High Energy Efficiency

The advanced inverter system with a DC motor forms a complete DC frequency conversion system, dramatically reducing power consumption by more than 30%.

Stable Water Temperature, Enhanced Comfort

Thanks to DC inverter technology, the compressor's rotation speed is fully controlled according to energy requirements.

Fast Start-up

The inverter system delivers power according to energy demand by adjusting the rotational motor's frequency, thus enabling comfort conditions to be achieved faster compared to a non-inverter system. Start-up time is reduced.

Fewer Start-ups

Inverter technology ensures fewer start/stop cycles. This significantly increases compressor lifespan and reduces abrupt noise.

Quiet Operation

For most of its operating time, the energy required in a building is less than the peak load; consequently, the system operates under partial load for the majority of the time. Partial load conditions achieved through the adjustable compressor frequency produce low noise levels, resulting in quiet operation.

Flexible Operation and Greater Comfort

Weather-dependent operation with climate correlation ensures absolute comfort. There are 32 climate correlation curves available for selection. Depending on the chosen curve, the unit automatically adjusts the water outlet temperature according to the outdoor ambient temperature.

The product features:

  • Wired controller (thermostat).
  • Integrated hydronic module.
  • Electric heaters (excluding the 9kW model).
  • Greek menu.
  • Integrated WiFi Msmartlife APP control.
  • Modbus protocol and network flexibility.

 

 

View all Midea products HERE

Additional information

Tύπος Αντλίας

Απόδοση (kW)

Φάσεις Αντλίας Θερμότητας

Κατηγορία Θερμοκρασιών

ΜΑΧ Θερμοκρασία Νερού

MIN Θερμοκρασία Νερού

COP

EER

Διαστάσεις

Επικοινωνήστε μαζί μας

Για οτιδήποτε χρειαστείτε μην διστάσετε να επικοινωνήστε μαζί μας. Ένας εκπρόσωπός μας θα σας εξυπηρετήσει άμεσα!

Τελευταία νέα: