loader image

Midea M-THERMAL MHC-V10W/D2N8-B 10kW Single-Phase Heat Pump (1ph)

Certifications: EN14511, EN14825, EN50564, EN12102, (EU) No. 811/2013, (EU) No. 813/2013, OJ 2014/C 207/02:2014, EN12102-1, etc.
Warranty: 3 years for the compressor and 2 years for all other components.
Heat Pump Type: Monobloc
Output Capacity: 10 kW.

Product Code: MHC-V10W/D2N8-B.

Midea M-THERMAL MHC-V10W/D2N8-B

 

The MIDEA M-Thermal heat pump is an integrated system for space heating and cooling, as well as domestic hot water production. The system can fully replace traditional gas or oil boilers, but can also operate in conjunction with them.

DC Inverter Technology

Conventional heat pump compressors operate at full load even when only partial load is required, resulting in energy waste. Midea’s M-Thermal products utilize DC inverter technology, which allows for the use of only the necessary power corresponding to the actual load. Consequently, power is consumed only based on actual energy demand.

High Energy Efficiency

The advanced inverter system with a DC motor forms a fully DC frequency conversion system, dramatically reducing power consumption by more than 30%.

Stable Water Temperature Level, Greater Comfort

Thanks to DC inverter technology, the compressor’s rotation speed is fully controlled according to energy requirements.

Fast Start-up

The inverter system delivers power according to energy demand by adjusting the rotary motor’s frequency, thus enabling comfort conditions to be achieved in less time compared to a non-inverter system. Start-up time is reduced.

Less Frequent Start-ups

Inverter technology ensures fewer start/stop cycles. This significantly increases compressor lifespan and reduces sharp noise.

Quiet Operation

For most of its operating time, the energy required in a building is less than the peak load; consequently, the system operates under partial load most of the time. The partial load conditions achieved thanks to the adjustable compressor frequency produce low noise levels, resulting in quiet operation.

Flexible Operation and Greater Comfort

Weather-dependent operation with climate correlation ensures absolute comfort. There are 32 climate correlation curves available for selection. Depending on the chosen curve, the unit automatically adjusts the water outlet temperature according to the outdoor ambient temperature.

The product features:

  • Wired controller (thermostat).
  • Built-in cold storage.
  • Electric heaters (excluding the 9KW model).
  • Greek menu.
  • Integrated WiFi Msmartlife APP control.
  • Modbus protocol and network flexibility.

 

 

View all Midea products HERE

SKU: MHC-V10W/D2N8-B Categories: , Brand:

Midea M-THERMAL MHC-V10W/D2N8-B

 

The MIDEA M-Thermal heat pump is an integrated system for space heating and cooling, as well as domestic hot water production. The system can fully replace traditional gas or oil boilers, but can also operate in conjunction with them.

DC Inverter Technology

Conventional heat pump compressors operate at full load even when only partial load is required, resulting in energy waste. Midea's M-Thermal products utilize DC inverter technology, which allows for the use of only the necessary power corresponding to the actual load. Consequently, power is consumed only based on actual energy demand.

High Energy Efficiency

The advanced inverter system with a DC motor forms a fully DC frequency conversion system, dramatically reducing power consumption by more than 30%.

Stable Water Temperature Level, Greater Comfort

Thanks to DC inverter technology, the compressor's rotation speed is fully controlled according to energy requirements.

Fast Start-up

The inverter system delivers power according to energy demand by adjusting the rotary motor's frequency, thus enabling comfort conditions to be achieved in less time compared to a non-inverter system. Start-up time is reduced.

Less Frequent Start-ups

Inverter technology ensures fewer start/stop cycles. This significantly increases compressor lifespan and reduces sharp noise.

Quiet Operation

For most of its operating time, the energy required in a building is less than the peak load; consequently, the system operates under partial load most of the time. The partial load conditions achieved thanks to the adjustable compressor frequency produce low noise levels, resulting in quiet operation.

Flexible Operation and Greater Comfort

Weather-dependent operation with climate correlation ensures absolute comfort. There are 32 climate correlation curves available for selection. Depending on the chosen curve, the unit automatically adjusts the water outlet temperature according to the outdoor ambient temperature.

The product features:

  • Wired controller (thermostat).
  • Built-in cold storage.
  • Electric heaters (excluding the 9KW model).
  • Greek menu.
  • Integrated WiFi Msmartlife APP control.
  • Modbus protocol and network flexibility.

 

 

View all Midea products HERE

Additional information

Tύπος Αντλίας

Απόδοση (kW)

Φάσεις Αντλίας Θερμότητας

Κατηγορία Θερμοκρασιών

ΜΑΧ Θερμοκρασία Νερού

MIN Θερμοκρασία Νερού

COP

EER

Διαστάσεις

Contact Us

For anything you may need, do not hesitate to contact us. One of our representatives will assist you immediately!

Contact us

For anything you need, please do not hesitate to contact us. A representative will assist you immediately!

Recent news:

Latest News: